Robust equipment for grinding wood, biomass and grain with innovative bi-directional operation that doubles hammer service life and significantly reduces maintenance costs.
Unique technology enabling use of both sides of the hammer — 100% utilisation of hammer material and twice the service life
Reversible rotation allows use of both sides of the hammer. Twice the service life and 50% lower hammer costs.
Podesive noge za laku instalaciju bez potrebe za specijalnim fundamentom. Kompenzacija neravnina i smanjenje vibracija.
Automatic feed rate control based on motor load. Overload protection and capacity optimisation.
Central lubrication system with automatic cycles. Extended bearing life and reduced maintenance.
Quick-release mechanism for screen replacement in 15–20 minutes. Various screen opening sizes available (2–10 mm).
Built-in magnet and stone trap. Separates metal objects and stones, protecting hammers and screen from damage.
Material enters the mill through a feeder that controls flow according to drive motor load.
High-speed rotor with hammers strikes material, breaking it into smaller pieces. Material bounces inside the chamber and is struck multiple times.
Only sufficiently fine particles pass through the screen openings of the desired size (2–10 mm).
The fan draws in the fine material and conveys it to the cyclone separator.
The cyclone separates product from air and deposits it into the final product bunker.
When one side of the hammer wears out, reverse the rotation direction and the other side starts working — twice the service life!
| Model | Rotor (mm) | Width (mm) | Speed (rpm) | Hammers (pcs) | Power (kW) | Grains (T/h) | Drvo (T/h) |
|---|---|---|---|---|---|---|---|
| AMC-650/450 | 650 | 425 | 2800 | 72 | 45 | 5-6 | 0.8-1.2 |
| AMC-650/750 (H) | 650 | 725 | 2800 | 94 | 45 | 5-6 | 0.8-1.2 |
| AMC-650/750 (L) | 650 | 725 | 1440 | 94 | 55 | 6-9 | 1.4-2.0 |
| AMC-1300/650 (S) | 1300 | 625 | - | - | 90 | 10-12 | 2.0-2.5 |
| AMC-1300/650 (M) | 1300 | 625 | - | - | 110 | 14-16 | 2.5-3.0 |
| AMC-1300/650 (L) | 1300 | 625 | - | - | 132 | 18-20 | 3.0-3.5 |
Reversible operation reduces hammer costs by 50%. Energy efficiency and optimised consumption. ROI typically 12–24 months.
Capacities from 0.8 to 3.5 T/h for wood and up to 20 T/h for grains. High sieve throughput and consistent product quality.
Automatic bearing lubrication. Fast screen change (15–20 min). Lower operating costs and 97%+ uptime.
One mill for different materials. Interchangeable screens 2–10 mm. Simple changeover between grains, wood and biomass.
Magnet and stone catcher protect the equipment. Emergency stop and interlocks for operator safety.
Robust steel design. Balanced rotor and heavy-duty bearings. Heat-treated hammers for long service life.
Contact us for a detailed quote and technical consultation
Request a Quote